Loading ...
Loading ...
Loading ...
30
Dishwasher / User manual
/44 EN
Operating the product
C
There might be residues of
detergent or rinse aid in the
machine and/or on the pieces
being washed depending on
the ep the programme you
have cancelled was in.
)
Please check the salt indicator on
the display to see whether there is
adequate amount of softening salt in
the dishwasher or not. You need to rell
the salt reservoir with salt whenever salt
indicator appears on the display of your
machine.
C
Adjuing the water hardness
level is explained in Water
Softening Syem section.
)
Please check the rinse aid indicator
on the display to see whether there is
adequate amount of rinse aid in the
dishwasher or not. You need to rell
the rinse aid reservoir with rinse aid
whenever rinse aid indicator appears on
the display of your machine.
1. After turning on the machine,
press Time Delay and P+ keys
simultaneously. After the countdown
(3, 2, 1) is displayed keep the keys
pressed for a while.
2. Press P+ to move to position (P) on
the display.
3. Set to the appropriate level with the
Time Delay key.
4. Press On / Off key to save the
setting.
No rinse aid dispensed in P:0 wash
position.
1 dose of rinse aid is dispensed in P:1
position.
2 doses of rinse aid are dispensed in
P:2 position.
3 doses of rinse aid are dispensed in
P:3 position.
4 doses of rinse aid are dispensed in
P:4 position.
C
When the programme you
have selected comes to an
end, an audible warning
signal will warn you to turn o
your machine. This audible
signal will warn you with
certain intervals before it
turns o.
End of Programme indicator will light up
when the washing programme is over.
1. Open the door of the machine.
2. Press On/Off key to turn off your
machine.
3. Close the tap.
4. Unplug the machine from the
socket.
C
For energy saving, the
machine is automatically
turned o following the
completion of the programme
or if the programme is not
arted.
Loading ...
Loading ...
Loading ...