Loading ...
Loading ...
Loading ...
Dishwasher / User manual
25 / 44
EN
Operating the product
When you press On / O key, indicator
lights illuminate on the display for ON
position. The lights turn o in OFF
position.
Press this key until the desired
programme appears in the programme
indicator.
To cancel the running programme open
the door of the product. Press and hold
the Programme Selection / Programme
Cancel keys for 3 seconds. After the
3 - 2 - 1 countdown, 0:01 is displayed,
close the door of the product and wait
for the draining process complete.
Draining is completed in 2 minutes and
the machine gives an audible warning
when it is completed.
If you press any of the Function keys
during programme selection or time
delay selection, an armative key
signal will be heard provided that the
relevant function is supported by the
selected programme. Function will be
deemed selected when the indicator of
the selected function is lit.
To cancel the selected function, keep
the function key pressed until the
function indicator disappears.
1. Open the door of the dishwasher.
2. Place the dishes in accordance with
the instructions in the user manual.
3. Make sure that the upper and lower
impellers rotate freely.
4. Put adequate amount of detergent
into the detergent dispenser.
1. Press the On/Off button to turn on
your machine.
2. Check the Salt and Rinse Aid
indicators and add salt and/or rinse
aid if needed.
3. Refer to the table of “Programme
data and average consumption
values” to determine a washing
programme suitable for your dishes.
4. Selected programme will start when
you close the door of your machine.
Loading ...
Loading ...
Loading ...