Blomberg LDV02284 Slim Size Integrated Dishwasher

Manual - Page 15

For LDV02284.

PDF File Manual, 45 pages, Read Online | Download pdf file

LDV02284 photo
Loading ...
Loading ...
Loading ...
14
Dishwasher / User manual
/44 EN
In󰀬allation
Remove the test
strip from the
packet.
Turn on the tap and
let the water run for
about a minute.
Hold the test strip in
the water for about
a second.
Remove the test
strip from the water
and shake it.
Wait for 1 minute. The test strip shows
you the hardness
level.
After determining hardness level of the supply water:
1. Turn on the machine, press Time Delay and P+/P keys simultaneously. After the
countdown (3,2,1) is displayed keep the keys pressed for a while.
2. Press P+/P key to activate the (r..) position.
3. Using Time Delay key, adju󰀬 water hardness level according to the hardness of
the supply water. See “Water hardness level adju󰀬ment table” for correct setting.
4. Press On / O󰀨 key to save the setting.

Hardness
Level
English Water
Hardness °dE
German Water
Hardness °dH
French Water
Hardness °dF
Water Hardness Level Indicator
0th Level
0-5 0-4 0-8
Press the Time Delay key to switch the water hardness level
to position 1. (r1)
1st Level
6-9 5-7 9-13
2nd Level
10-15 8-12 14-22
Press the Time Delay key to switch the water hardness level
to position 2. (r2)
3rd Level
16-19 13-15 23-27
Press the Time Delay key to switch the water hardness level
to position 3. (r3)
4th Level
20-24 16-19 28-34
Press the Time Delay key to switch the water hardness level
to position 4. (r4)
5th Level
25-62 20-50 35-90
Press the Time Delay key to switch the water hardness level
to position 5. (r5)
If the hardness level of the supply water is above 90 °dF or if you are using well
water, then it is recommended to use water purication devices and special lters.
If the hardness level of the supply water is below 13°dF, there is no need to use salt
in your dishwasher. If this is the case, “No Salt Warning Indicator” (if any) illuminates
continuously on the panel of your machine.
If the water hardness level adju󰀬ment is set to level 1, the “No salt warning
indicator” will illuminate continuously although it is not necessary to use salt. If you
use salt under this condition, salt will not be consumed and the Salt indicator will not
illuminate.
Loading ...
Loading ...
Loading ...