Loading ...
Loading ...
Loading ...
10
Dishwasher / User manual
/44 EN
Inallation
A
For your safety, close the
water inlet tap completely
after the washing programme
is over.
Water discharge hose can directly be
connected to the drain hole or sink’s
drainage. The length of this connection
mu be min. 50 cm and max. 100 cm
from the oor. A discharge hose longer
than 4 meters will cause washing
performance to be aected.Attach the
water discharge hose to the drainpipe
without bending it. Tightly x the water
discharge hose to the drainpipe in order
to prevent any dislocation of the water
discharge hose during operation of the
product.
min
300
min
120
max 1000
min 500
(depends on model)
The aquAvoid™ plus syem protects
again water leaks that may occur
at the hose inlet.Water contact with
the valve box of the syem mu be
avoided to prevent damage to the
electrical syem. If the aquAvoid™ plus
syem is damaged, unplug the product
and call the Authorised Service Agent.
A
As the hose set contains
electrical connections and
assemblies, never shorten
or lengthen the hose with
extension hoses.
If the door of the product cannot
be closed properly or if the product
wobbles when you push it slightly,
then you need to adju the feet of the
product. Adju the feet of the product
as illurated in the relevant section.
A
Diswashers door mu be
aligned properly otherwise
hot eam can escape!
Danger of serious burns,
other injury or may damage
furniture.
C
Drainpipe mu be connected
to the foul water syem and
it should not be connected to
any surface water drain.
Loading ...
Loading ...
Loading ...