Loading ...
Loading ...
Loading ...
- 1
Please read and comply with these
original instructions prior to the ini-
tial operation of your appliance and store them
for later use or subsequent owners.
Notes about the ingredients (REACH)
You will find current information about the
ingredients at:
www.kaercher.com/REACH
Illustrations on the inside of the front
cover
1 Pistol body
2 Stream nozzle
3 Injector
4 Air nozzle
5 Hose for spraying agent
6 Air hose with hose coupling SKG 19
(not included in the delivery)
7 Suction pipe
8 Hose clip
9 Spray agent control
10 Water connection
11 Safety valve
12 Selection switch, water ON/OFF
13 Air volume control button
14 Water volume control button
15 Trigger safety
16 Pistol trigger
17 Handle
The jet pistol is intended for connection to a
compressed air source. The compressed
air jet sucks in the spray agent, which is en-
trained in the air jet.
In order to avoid the formation of dust dur-
ing spraying, water can be added to the
mixture of spray agent and air.
Application examples:
– Graffiti removal
– Cleaning of natural stone facades
– Cleaning of artificial stone surfaces
– Cleaning of plastered facades
– Keying of surfaces
– Rust removal
– Polish welding seams
– Paint removal
– Base preparation
Suitable spraying agents:
– Dry spraying agent.
– Grain size max. 1.5 mm.
– Please read the operating instructions
for your machine before using it, and
pay particular attention to the following
safety instructions.
– Warnings and notes that are attached
to the appliance provide important
notes for safe operation.
– Apart from the notes contained herein
the general safety provisions and rules
for the prevention of accidents of the
legislator must be observed.
– Only use conventional hoses and cou-
plings for the compressed air connec-
tion. The same applies for
replacements of hoses and couplings.
– Make sure that the compressed air
hose is not damaged by running over,
pinching, dragging or similar actions.
– The compressed air hose must be in-
stalled in a straight line or a wide arc in
order to avoid the formation of kinks.
– Maintenance work may only be carried
out by approved customer service out-
lets or experts in this field who are famil-
iar with the respective safety
regulations.
– Disconnect the compressed air line pri-
or to performing any cleaning and main-
tenance tasks or replacing parts.
– Only use accessories and spare parts
which have been approved by the man-
ufacturer. The exclusive use of original
accessories and original spare parts
ensures that the appliance can be oper-
ated safely and trouble free.
– Observe regulations of water supplier.
– Ensure that the screw connections of
the connecting hoses do not leak.
– The air hose must not be damaged (risk
of bursting). A damaged hose must be
replaced immediately. Only hoses and
joints recommended by the manufac-
turer may be used. See operating in-
structions for order number.
– The machine with working equipment
must be checked to ensure that it is in
proper working order and is operating
safely prior to use. Otherwise, the appli-
ance must not be used.
– If the appliance is used in hazardous ar-
eas (e.g. filling stations) the corre-
sponding safety provisions must be
observed. It is not allowed to use the
appliance in hazardous locations.
– All current-conducting parts in the work-
ing area must be protected against jet
water.
– The lever of the hand spray gun must
not be locked during the operation.
– Wear appropriate protective clothing to
protect yourself from spattering parts.
– Never direct the water jet on human be-
ings, animals, the appliance or electri-
cal parts.
– Do not clean materials containing as-
bestos or other health-hazardous sub-
stances.
– Wear hearing protection.
– The alternate or simultaneous spraying
of light metals and iron-containing parts
in a spray room is prohibited, unless the
cleaning of the spray room is ensured
prior to each change (fire and explosion
risk).
– You must not use spray agents contain-
ing iron to spray magnesium alloy con-
taining more than 80% magnesium.
– It is prohibited to use silicone spraying
agents.
– Do not use any spraying agents that ex-
ceed the permissible limits of hazard-
ous substances according to the
applicable required specifications.
Please follow the national/ local regulations
for the following topics while working in
containers or in closed rooms:
– Working in containers and closed
rooms
– Use of personal emergency signal units
Wear the following protective equipment
while spraying:
– Eye and face protection
– Hearing protection
– Impact protection covering the body
and shoulders
– Protective gloves
– Safety shoes
– respirator if necessary
Safety and hygiene regulatioins according
to the national/ local regulations need to be
followed.
– The operator must use the appliance
properly. The operator must consider
the local conditions and must pay atten-
tion to third parties, in particular chil-
dren, when working with the appliance.
– The appliance may only used by per-
sons who have been instructed in han-
dling the appliance or have proven
qualification and expertise in operating
the appliance or have been explicitly
assigned the task of handling the appli-
ance. The appliance must not be oper-
ated by children, young persons or
persons who have not been instructed
accordingly.
– Never leave the machine unattended
so long as it is under pressure.
– The air jet that is emitted from the jet
nozzle results in a repulsion power act-
ing on the gun. Therefore, hold on tight.
– Do not touch the emerging spray jet.
Jet pistol ST 120
Environmental protection
The packaging material can be
recycled. Please do not throw
the packaging material into
household waste; please send
it for recycling.
Old appliances contain valua-
ble materials that can be recy-
cled; these should be sent for
recycling. Batteries, oil, and
similar substances must not
enter the environment. Please
dispose of your old appliances
using appropriate collection
systems.
Control elements
Proper use
Safety instructions
7EN
Loading ...
Loading ...
Loading ...