Loading ...
Loading ...
Loading ...
DW089/DW089CG
25
E
2. Open the jaws of the clamp by turning the clamp knob (a1)
counterclockwise.
3. Position the detector at the height needed and turn the clamp
knob clockwise to secure the clamp on the rod.
4. To make adjustments in height, slightly loosen the clamp,
reposition, and retighten.
Detector Cleaning and Storage
• Dirt and grease may be removed from the exterior of the
detector using acloth or soft, non-metallic brush.
• The D
EWALT digital laser detector is rain resistant but not
immersible. Do not pour water on the unit or submerge it under
water.
• The best storage place is one that is cool and dry—away from
direct sunlight and excess heat or cold.
Detector Service
Except for batteries, there are no user serviceable parts in the Digital
Laser Detector. Do not disassemble the unit. Unauthorised tampering
with the laser detector will void all warranties.
Detector Troubleshooting
THE DETECTOR WILL NOT TURN ON
• Press and release the power button.
• Check to see that the battery is in place and in the proper
position.
• If the detector is very cold, allow it to warm up in aheated area.
• Replace the 9-volt battery. Turn the unit on.
• If the detector still does not turn on, take the detector to aD
e
WALT
service centre.
DW089_DW089CG - User Manual - NA - May 2018.indd 25 5/25/2018 10:40:49 AM
Loading ...
Loading ...
Loading ...