Loading ...
Loading ...
Loading ...
74 - CLEANING AND MAINTENANCE 91477A046/A
remove the door and place it on a tea towel.
To remove the door proceed as follows:
1. Open the door completely and insert two
pins into the holes on the hinges indicated in
the figure.
2. Grasp the door on both sides with both
hands, lift it forming an angle of around 30°
and remove it.
3. To reassemble the door, put the hinges in
the relevant slots in the oven, making sure
that grooved sections A are resting
completely in the slots.
4. Lower the door and once it is in place
remove the pins from the holes in the hinges.
Cleaning the door glazing
The glass in the door should always be kept
thoroughly clean. Use absorbent kitchen roll. In
case of stubborn dirt, wash with a damp sponge
and an ordinary detergent.
Removing the internal glass panes
For easier cleaning the internal glass panes of
the door can be removed.
1. Lock the door with the appropriate pins.
2. Release the rear pins from the internal glass
pane by pulling the rear part gently
upwards, following the movement indicated
by the arrows.
3. Then remove the inner glass pane from the
front profile.
4. Pull the intermediate glass unit downwards
from the door and then lift it upwards.
During this step, the upper grommets may come
out of their seats.
5. Insert the front grommets into their seats. The
feet of the grommets must be facing the
external glass..
Loading ...
Loading ...
Loading ...