Loading ...
Loading ...
Loading ...
USE - 5591477A046/A
e
RAPID PRE-HEATING
PROBE (on some models only)
First use
To switch on the appliance:
1. Connect the appliance to the mains power
supply.
The manufacturer’s logo will display for a few
seconds.
The display then shows the current time setting
screen.
To be able to start any cooking function, the
current time must be set.
2. Scroll up and down through the hours and
minutes to set the current time.
3. Touch the CONFIRM button (at the
right in the lower area ) to set the
current time.
The first time you use the appliance, it may be
set to a language other than the one you speak.
It is recommended that you set the required
language at this point.
4. Touch the SETTINGS button on the
display (at the right in the lower area ).
5. Touch the display button .
6. In the Language option (on the left),
scroll through the available languages (on
the right) to select the required language.
7. Touch the CONFIRM button.
Deactivating the display
To deactivate the display manually:
• Press and hold the ON-OFF
button for a few seconds until you hear a
sound.
Reactivating the display
To reactivate the display when it is off:
• Press and hold the ON-OFF
button for a few seconds until you hear a
series of sounds.
Press and hold the HOME button
or the ON-OFF button for a few
seconds to stop cooking immediately at
any time and return to the main menu.
The following instructions are also valid
in the case of a prolonged power
failure.
After the appliance is switched on, you
will need to wait a few seconds before
you can use it.
To change the current time (e.g. due to
daylight saving time) touch the time
shown on the display (in the information
area on the right).
When the current time is visible, after 2
minutes from the last operation by the
user it is displayed with low brightness.
When the " Show the time" mode is
set to Off, if the time display is shown,
the display will switch off automatically
after 2 minutes.
Loading ...
Loading ...
Loading ...