Zip MB1716Z03 Hydrotap Miniboil BA Classic Tap Matte Black

User Manual - Page 9

For MB1716Z03.

PDF File Manual, 12 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
9
805757 v1.05 06.21 Miniboil Install Instructions
Operation
Note: If the appliance has not been used for several days, allow the tap to
run ambient water for about one minute.
Tap Operation
Press the RED lever and the SAFETY button to dispense boiling water.
Pull the RED lever up while holding the SAFETY button to dispense boiling water
continually. The water will flow for about 15 seconds. Then manually return the
lever to the off position.
Press the BLUE lever to dispense cold (ambient) water. Pull the lever up to
dispense ambient water continually. The water will flow for about 15 seconds.
Then manually return the lever to the off position.
Tap Lights
Red LED: Boiling water
Steady light: boiling water is ready and can be dispensed.
Flashing: the water temperature is below the set value. Boiling water
cannot be dispensed.
Flashing slowly: the unit is in Sleep mode.
Blue LED: Cold (ambient) water (for BA model only)
Steady light: ambient-temperature water can be dispensed.
All LEDs: Fault
Flashing: there is a fault in the unit. In that case, switch off the unit for
at least 20 seconds. If the fault has not been corrected when the unit is
switched on again, contact customer service.
Change Filter light
Off: Indicates the water filter is operating within its normal specified
lifespan.
Flashing slowly: Indicates the water filter is due for replacement, after 12
months of use or after dispensing 4000 litres, whichever occurs first. To
replace the filter, refer to Fig 3. After the filter is changed, it should be
flushed. Refer to Filter flush on previous page.
Reset filter counters: After filter is changed, hold down BOTH LEVERS for
10 seconds. The Filter Change light will turn ON, and after 10 seconds will
turn OFF. This will reset the filter counters to zero.
Boiling water (BA model):
Press or pull the red lever,
and cover the Safety button
at the same time.
Boiling water will be
dispensed.
Change Filter light
Boiling Only model:
Press or pull either red
lever, and cover the Safety
button at the same time.
Boiling water will be
dispensed.
Cold (ambient) water
(BA model):
Press or pull the blue lever.
Cold water will be
dispensed.
Loading ...
Loading ...
Loading ...