Loading ...
Loading ...
Loading ...
Option menu items
Use the following table to configure playback settings of the unit.
Note
▪ Available items vary depending on the selected input source.
▪ Text in parentheses denotes indicators on the front display.
Item Function Page
Input Select (Input Select)
Switches the input source. p.53
Tone Control (Tone Control)
Adjusts the level of high-frequency range and low-
frequency range individually.
p.53
DSP/Surround
(DSP/
Surround)
Program (PRG)
Select the sound programs and stereo playback. p.54
Sur.Decode
(SrDec)
Select which surround decoder is used when
Sur.Decode is selected as the program.
p.55
DSP Level
(DSP Level)
Adjusts the sound field effect level. p.56
Adaptive DRC
(A.DRC)
Sets whether the dynamic range (from maximum to
minimum) is automatically adjusted to the volume.
p.56
Enhancer
(Enhancer)
Enables/disables Compressed Music Enhancer. p.56
Volume Trim
(Volume Trim)
Input Trim
(In.Trim)
Corrects volume differences between input sources. p.56
Subwoofer Trim
(SW.Trim)
Fine-adjusts the subwoofer volume. p.56
Lipsync (Lipsync)
Enables/disables the “Lipsync” setting in the “Setup”
menu.
p.57
Signal Information (Signal Info.)
Displays information about the video/audio signals. p.57
Audio In
(Audio In)
Combines the video of the selected input source with
the audio of a different input source.
p.57
Video Out (Video Out)
Selects a video source to be output together with the
selected audio source.
p.59
FM Mode (FM Mode)
Switches between “Stereo” and “Monaural” for FM
radio reception.
p.59
Preset (Preset)
Auto Preset
(AUTO)
Automatically registers FM radio stations with strong
signals as presets.
p.59
Clear Preset
(CLEAR)
Clear radio stations registered to preset numbers. p.60
Traffic Program
(TrafficProgram)
(U.K., Europe and Russia models only)
Automatically searches for a traffic information
station.
p.60
Repeat
(Repeat)
Configures the repeat setting. p.61
Item Function Page
Pairing
(Pairing)
Performs a pairing operation between the unit and
your Bluetooth device.
p.62
Connect/Disconnect (Connect/
Disconnect)
Connects/disconnects the Bluetooth device. p.62
Input Interlock (Interlock)
Sets whether the input source automatically switches
to "Bluetooth" when a Bluetooth connection is
established.
p.63
Switching the input source
Switches the input source. Press ENTER to switch to the selected input source.
Option menu
“Input Select”
Adjusting the tone of the audio output
Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass)
individually.
Option menu
“Tone Control”
Choices
Treble, Bass
Setting range
-6.0 dB to +6.0 dB (0.5 dB increments)
Note
▪ When both “Treble” and “Bass” are 0.0 dB, “Bypass” appears.
▪ You can also adjust the tone with the front panel controls. Press TONE CONTROL to select “Treble” or
“Bass”, then press PROGRAM to make an adjustment.
▪ If you set an extreme value, sounds may not match those from other channels.
En
53
Loading ...
Loading ...
Loading ...