Loading ...
Loading ...
Loading ...
14
ENG
The brackets cannot touch with the inner surfaces of the worktop after installation under any circumstances (see
picture).
• The isolating switch will be easily accessible to the customer with the hob installed.
• You consult local building authorities and by-laws if in doubt regarding installation.
• You use heat-resistant and easy-to-clean finishes (such as ceramic tiles) for the wall surfaces surrounding the hob.
• The power supply cable is not accessible through cupboard doors or drawers.
• There is adequate flow of fresh air from outside the cabinetry to the base of the hob.
• If the hob is installed above a drawer or cupboard space, a thermal protection barrier is installed below the base of the hob.
• The isolating switch is easily accessible by the customer.
The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force onto the controls protruding from
the hob.
Fix the hob on the work surface by screwing 4 brackets to the bottom of hob (see picture) after installation.
Adjust the bracket position to suit for different table top thickness.
After installing the hob, make sure that
Before locating the fixing brackets
Adjusting the bracket position
HOB HOB
BRACKET BRACKET
TABLE TABLE
Loading ...
Loading ...
Loading ...