Loading ...
Loading ...
Loading ...
Connect the power cord to a standard wall outlet. Do not use a GFCI outlet to connect the unit
(see page 4). After connection, you will immediately hear a short beep.
PROPER USE OF BEVERAGE COOLER
Startup
Display Controls
The default temperature is 43°F. Use the and buttons to set the desired temperature
between the range of 32°F-61°F.
The display will flash while the temperature is being set. After a few seconds， it will revert to its
current internal temperature reading. The digital display reading will adjust as the unit cools.
While the unit is adjusting to the new setting, press the or buttons to view the selected
temperature setting.
If there is a power outage, the unit will revert to the last temperature setting once power is
restored.
Loading Beverages
When first loading the beverage cooler to full capacity, we recommend the following steps to
effectively cool a large number of beverages.
1. Use the Adjustable Thermostat Control to set the temperature to 43°F (also the default
temperature).
2. Allow the beverage cooler to cool for a minimum of two hours.
3. Load the beverages. To achieve maximum capacity, refer to the loading diagrams.
4. After initially filing with beverages, the internal temperature will rise as indicated on the display.
5. Once the beverage cooler has cooled the beverages to 43°F, use the Adjustable
Thermostat Control to select a desired cooler internal temperature (lowest temperature setting is
40°F).
6. Allow several hours for the beverage cooler to cool to the desired lower temperature.
Note：It is normal for temperature variances to occur inside the unit, and areas near the door will
have slightly warmer temperatures.
LED LIGHT
Press the button to turn the LED light on and off.
To enhance the lifespan of the LED light and conserve energy, it is recommended to
predominantly utilize the light for loading and selecting beverages.
Instructions
06
Loading ...
Loading ...
Loading ...