Loading ...
Loading ...
Loading ...
Tools needed: flathead screwdriver, Phillips screwdriver
CAUTION: Before you begin, unplug the beverage refrigerator from power.
1. Using a flathead screw driver, carefully pry the top hinge cover off.
2. Using a Phillips screwdriver, remove the screws and take off the
top hinge. Keep the parts together and set them aside.
3. Lift the door off the bottom hinge and set the door aside.
4. Remove the bottom hinge by removing the screws with a Phillips
head screwdriver.
1. Using a flathead screwdriver, remove the plugs and cover from the opposite cabinet top corner
and from the door.
2. Install the bottom hinge at the opposite side corner and fasten the screws.
3. Position the door on the bottom hinge.
4. Align the door on the bottom hinge and install the top hinge.
5. Push the plugs and covers into the corresponding holes.
1
- It is important for the beverage cooler to be levelled in
order to work properly.
- It can be raised or lowered by rotating each of the feet on
the bottom of the machine.
- If you find that the surface is not level, rotate the feet
until the beverage refrigerator becomes level. You may
need to make several adjustments to level it. We recom-
mend using a carpenter’s level to check the machine.
1. Place a carpenter’s level on top of the product to see if the beverage refrigerator is level from
front to back and side to side.
2. Adjust the height of the feet as follows: Turn the levelling feet to the right to lower that side of
the refrigerator. Turn the levelling feet to the left to raise that side of the refrigerator.
IMPORTANT: Once you are ready to install, you must adjust the feet to level the beverage
refrigerator.
REVERSING THE DOOR SWING
To remove the door:
To install the door:
LEVELING THE APPLIANCE
Placement
07
Hinge Cover
Top hinge
Screws
Cabinet
Door
Loading ...
Loading ...
Loading ...