Loading ...
Loading ...
Loading ...
A freestanding installation will allow you to install the beverage refrigerator in any place you desire
provided that the required clearance space around the appliance is respected. In every setting, there
must be adequate ventilation and access for service. Never install or operate the unit in an enclosed
area, such as a closed cabinet. Allowance of at least 5 inches (127mm) of space between the back
and sides of the appliance are suggested, which allows the proper air circulation to cool the
compressor and condenser.
This appliance requires a standard 115/120 Volt AC ~/60Hz electrical ground outlet with
three-prong. Have the wall outlet and circuit checked by a qualified electrician to ensure that the
outlet is properly grounded. The cord should be secured behind the appliance and not left exposed
or dangling to prevent accidental injury.
The appliance should always be plugged into its own individual electrical outlet which has a voltage
rating that matches the rating label on the appliance. This provides the best performance and also
prevents overloading house wiring circuits that could be a fire hazard from overheated. Never
unplug the appliance by pulling the power cord. Always grip the plug firmly and pull straight out
from the receptacle. Immediately repair or replace all power cords that have become frayed or
otherwise damaged.
Do not use a cord that shows cracks or abrasion damage along its length or at either end. When
moving the appliance, be careful not to damage the power cord.
Because of potential safety hazards, it is strongly recommended that you do not use an extension
cord with this appliance. However, if you must use an extension cord, it is absolutely necessary that
it be a UL-Listed, 3-wire grounding type appliance extension cord having a grounding type plug and
outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes.
Improper use of the grounded plug may result in the risk of electrical shock. If the power cord is
damaged, have it replaced by a qualified electrician or contact EUHOMY Service Department.
FREESTANDING INSTALLATION
ELECTRICAL CONNECTION
EXTENSION CORD
Installation
Your beverage refrigerator should be conveniently located for day-to-day use in a dry,
well-ventilated room.
Do not install the appliance where the temperature will go below 60°F or above 90°F, because it will
not maintain proper temperatures. Be sure to install your beverage refrigerator on a floor strong
enough to support it when it is fully loaded.
INSTALLATION LOCATION
05
Loading ...
Loading ...
Loading ...