Loading ...
Loading ...
Loading ...
Problem Possible Causes Solutions
The appliance does
not operate
The appliance is not
cold enough
The appliance
frequently turns
on and off
The appliance makes
too much noise
The door does not
close proper- ly
Condensation builds
up on the glass door.
The appliance is not level
The door was reversed and not
properly installed
The shelves are out of position
Ambient temperature or humidity is
high.
Lower the room humidity by a dehu-
midifier or air conditioner.
Make sure the appliance is on a hard
and level surface. Avoid placing the
appliance on a carpeted or soft surface
Reinstall door
Correctly install the shelves
There is a power failure
The appliance is not plugged in
A house fuse has blown or the
1circuit breaker is tripped
The appliance is placed too close to
a heat source
The door is opened too often
The door is not closed completely
The door gasket does not seal
properly
The ambient (room) temperature is
too low or high
A large amount of contents has been
added to the appliance
The door is opened too often
The door is not closed completely
The door gasket does not seal
properly
The noise may come from the flow
of the refrigerant and expansion
of the inside walls may cause
popping and crackling noises
Contraction and expansion of the
inside walls may cause popping and
crackling noises
The appliance is not level
It is normal that as each cooling cycle
ends, you may hear rattling or gurgling
sounds caused by the flow of refriger- ant
in the appliance. The high efficien- cy
compressor may make a pulsating or high
pitched sound
Some popping or cracking noises are
normal. They are caused by expansion and
contraction of the inside walls due to
temperature changes
Make sure the unit is placed on a hard and
level surface. Do not place the appliance
on carpet
See Normal Sounds
Decrease or increase the ambient
(room) temperature
To minimize internal temperature
fluctuation, do not overstock the
appliance
Close the door tightly and do not
open the door too frequently or for
a long period of time
Ensure the door gasket is not loose
It is normal for the fan to come on
and turn off to circulate the air
inside of the unit for even
temperature distribution and to
save energy
Adjust the temperature
Keep the appliance away from sun-
shine or other heat sources
Close the door tightly and do not
open the door too frequently or for a
long period of time
Ensure the door gasket is not loose.
Ensure the appliance is plugged in
and the power outlet has power
Replace the broken fuse or reset the
breaker
Trouble shooting
11
Loading ...
Loading ...