Kenmore 119176790 Official Gas Grill

User Manual - Page 30

For 119176790.

PDF File Manual, 32 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Question:
Can iFconvert my gas grill from one fuel
type to anotherr such as LP to NG (natural
gas) or vice versa?
Answer:
No, your gas grill is manufactured to specific
standards developed by CSA and ANSI for your
safety and is certified for LPG (Liquid Propane
Gas) or NG (Natural Gas) use only.
Question:
Are the serial and model numbers of my grill
listed somewhere for reference?
Answer:
The serial and model numbers are listed on a
silver CSA label placed on the grill. Depending
on the grill model, the silver CSA label generally
will be located on the back panel of the cart.
Question:
My grill will not light properly. Why?
Answer:
Check these possibilities:
1. The gas supply is turned off at the LP
Cylinder or Natural Gas valve. Turn on LP
Cylinder or the gas at the Natural Gas
source.
2. Your LP Cylinder is out of propane.
3. Crimped fuel supply hose. Inspect and
straighten.
4. Regulator failure or damaged hose
assembly. Inspect and order a replacement
part. Do not use your grill if you find a
damaged hose assembly.
5. Gas not getting to the burners. Inspect the
burners under the control panel to be sure
they are aligned with the valve orifices.
6. Blockage in the gas system. Inspect
burners and valve orifices for blockages,
such as spider webs, insects, etc. Clean as
necessary.
Question:
My electronic ignition is not working.
Answer:
Listen to hear the electronic igniter clicking. If
not, check these possibilities:
1. Replace the AA battery. Ensure the "+"
end is facing up and out.
2. Ensure the battery is centered and fits into
the electronic igniter button properly.
3. Be sure the wires are all attached to the
electronic ignition assembly behind the
control panel and the individual burner
electrodes.
4. Inspect the electrodes to be sure they are
not coated with grease or dirt. If so, clean
with rubbing alcohol.
If you hear a clicking sound, then:
1. Inspect the electrodes to be sure they
are not coated with grease and dirt.
Clean with rubbing alcohol.
2. Inspect the distance from the electrode
to the burner. It should be 1/8 to 1/4
inch from the main burner and 1/8 to
3/16 inch from the side burner.
Question:
Sometimes I hear a humming sound
coming from my regulator. What causes
this?
Answer:
The humming sound is gas flowing
through the regulator. This is more likely
to occur in periods of high gas flow. A low
volume of sound is normal and will not
interfere with the operation of your grill.
Question:
My grill has a low flame on some
burners, or some burners will not light at
all. What can cause this?
Answer
This can be caused by the flow limiting
device, which is generally triggered by a
sudden change in pressure. Opening
the tank valve too fast or shutting the
burners off using the tank valve can
cause this. To reset:
1. Close the LP Tank valve and disconnect
the regulator assembly from the tank.
2. Let the LP Tank sit for 10 minutes.
3. Open all burner control knobs, including
the side burner, to "HI" at the same
time.
4. Close all burner control knobs.
5. Reconnect the gas regulator to the LP
tank.
6. Follow the burner lighting procedures
and light the burner farthest from the
LP tank.
Question:
Where do I use my grill for safer
operation and better performance7
Answer:
Strong winds and low temperatures can
affect the heating and performance of
your gas grill so factor in these elements
when positioning your grill outdoors for
cooking.
Use your grill at least 2 feet away from
any wall or surface.
3O
Loading ...
Loading ...