Loading ...
Loading ...
Loading ...
ANCHEER
15
CHARGING
YOUR BATTERY
Plug your charger into the wall, the LED light will
illuminate Green
Connect the charger to the battery using the cord
provided, the LED light on the charger will change to
REO. This indicates it is charging.
Once fully charged the LED light on the charger
switches back to GREEN indicating the battery is fully
charged, and then goes off.
It is forbidden to modify the battery, electronic control system and the frame structure
of the bike, etc. Otherwise, it may cause safety hazards and void the warranty service. If
you continue to do so, all will be at your own peril.
Do not cover the charger with any material or substance that may restrict airflow to
the charger. The charger needs to 'breathe' to keep cool.
Charging your battery each time you use it no matter how far the trip, will prolong
the life of the battery.
DO NOT leave the battery discharged for long periods.
Never open the charger or change setting on charger .
Your battery can be charged on or off your bike.
To fully charge your battery,
allow approximately 4-6 hours.
1.
1.
2.
2.
3.
4.
3.
4.
Your Lithium battery arrives partially charged.
Fig.27
WHEN CHARGING THE BATTERY
Charging port
❶
❷
❸
❹
Insert the charger probe into the charger
port on the e-bike battery. As shown in the
figure.
Insert the pronged end of the battery cord
into the battery charger.
Insert the AC plug into an AC outlet.
The red indicator light turns on and will
remain red until it is fully charged. The
indicator light turns green once the battery
is fully charged.
Loading ...
Loading ...
Loading ...