Loading ...
Loading ...
Loading ...
ANCHEER
9
FITTING
THE SADDLE
Rease the seat post, use a tool to pull out the black tube, and check the seat tube.
Slide the seat post into the seat tube and close the tension lever on the quick-release
clamp to lock your seat in place. (Fig. 16)
Adjust the saddle height by releasing the clamp and tightening when at the correct
height.(Fig. 17)
If the clamp does not tighten enough to hold the saddle in position, simply release
the tension lever and rotate a quarter of a turn on the wheel nut and close the tension
lever. Repeat as necessary.
1.
2.
3.
4.
The saddle and seat post are already fitted together.
Fig.16 Fig.17
Note:
Do not raise the seat post higher than the minimum insertion Level, marked
clearly on the Seat post .(Fig. 17)
Fig.13 Fig.14 Fig.15
Loading ...
Loading ...
Loading ...