Loading ...
Loading ...
Loading ...
ANCHEER
12
UNDERSTANDING
YOUR BATTERY
You are supplied with two keys to secure your battery to your bike. It is advisable to
separate the keys so that you don't lose both of them.
Release the quick-release mechanism and open the hinged frame, insert the key
and unlock the battery, remove the key, enabling you to remove the battery for
security or to charge it while away from the bike. (Fig.21 & Fig.22)
Once unlocked, the battery can be withdrawn from the frame .To replace the
battery simply reverse steps 2-3.
The charging port and battery ON/OFF switch are on the left side of the frame.
Remember to switch OFF when not in use, because leaving it in the ON position will
drain the battery. (Fig.23)
NOTE: Only charge your battery with the charger supplied with your E-Bike. The
charger is set to 110-240V.
Avoid dropping the charger as this may damage the sensitive electronics within
the casing.
The battery will stop charging automatically when it has reached full charge, but
it is not recommended to continue charging for any considerable amount of time
over what is required.
Battery install see the pictures .(Fig.21-Fig.24)
The more you use the assist, the more power it uses. Each rider is different, so power
usage can vary considerably with different rider weights and the terrain you ride. With
normal use, you should generally be able to obtain around 20 miles before you need to
recharge your battery.
We recommend that you get used to your new E-Bike and the level of assistance you
place on it. You'll soon be able to plan the length of the journey you can make and safely
return under assistance. If the charge runs out, you can ride your E-Bike as you would a
normal bike.
1.1
2.1
3.1
1.2
2.2
3.2
3.3
3.4
1.3
1. Security
2. Battery operation
3. Battery Charger and install
Loading ...
Loading ...
Loading ...