Loading ...
Loading ...
Loading ...
7
8 sec
Two tone
Fast blink Slow pulse
(For iOS and Android version)
By connecting this unit and mobile
P
iPr
1 Download and install the Philips
a phone or tablet.
Philips Sound
• Make sure your router is turned on
and working properly.
Note
•
Depending on the devicration
screen and the way to perform operations may
vary.
2 Connect your phone or tablet to the
same Wi-Fi network that you want to
connect your soundbar.
<
Wi-Fi
Wi-Fi
3 Press and hold (Wi-Fi) button
located at the back cabinet for 8
seconds to trigger the Wi-Fi
connection
→ Until the speaker make a second
tone and then release the button
4 Wait until the Wi-Fi light indicator on
the front cabinet goes from a fast blink
to a slow pulse. When it begins pulsing
slowly it indicates that the speaker is
entering the Wi-Fi setup mode.
6
7
5
Return to this app to continue setup.
Ready?
Go To Wi-Fi Settings
Wi-Fi Passwor
Enter the password for the network
1234567890
Show Password.
6
7
5
Return to this app to continue setup.
Ready?
Go To Wi-Fi Settings
Wi-Fi Password
Enter the password for the network Your Home Router
1234567890
I
Show Password.
6
7
5
Return to this app to continue setup.
Ready?
Go To Wi-Fi Settings
PlayFiDevice 1234
Wi-Fi Password
Enter the password for the network Your Home Router
1234567890
I
X
Show Password.
Your Play-Fi device is connecting to
Your Home Route
When the Wi-Fi light on the device stops
blinking and becomes solid the device is
setup and ready to be used.
Philips Soun
6
7
5
Return to this app to continue setup.
Ready?
Go To Wi-Fi Settings
Wi-Fi Passwor
Enter the password for the network
1234567890
I
Show Password.
6
7
5
Return to this app to continue setup.
Ready?
Go To Wi-Fi Settings
Wi-Fi Password
Enter the password for the network Your Home Router
1234567890
I
Show Password.
4 Connect
Connect to Wi-Fi (Wireless
Operation)
the Philips Sound app powered by DTS
Loading ...
Loading ...
Loading ...