12V Solar Trickle Charger
Warranty
40238
TO INSTALL
1. DC MALE POWER ADAPTER PLUG
Using the included DC Male Power adapter plug connect J-plug to panel J-plug.
Then plug Male adapter into your vessel’s 12V power socket.
Confirm that both connections are tight and secure. Confirm that the lighter socket
is active when vessel is off, otherwise us battery clamp connectors.
2. BATTERY CLAMP CONNECTOR
Using the included battery clamps connect J-plug to panel J-plug. Then connect
the red, Positive clamp to the Positive battery terminal. Finally connect the black,
Negative clamp to the negative battery terminal.
Confirm that both connections are tight and secure.
This KOOLATRON product is warranted to the retail customer for 90 days from
date of retail purchase, against defects in material and workmanship.
WHAT IS COVERED
• Replacement parts and labour.
• Transportation charges to customer for the repaired product.
WHAT IS NOT COVERED
• Damage caused by abuse, accident, misuse, or neglect.
• Transportation of the unit or component from the customer to Koolatron.
IMPLIED WARRANTIES
Any implied warranties, including the implied warranty of merchantability are also
limited to the duration of 90 days from the date of retail purchase.
WARRANTY REGISTRATION
Register on-line at www.koolatron.com AND keep the original, dated, sales receipt
with this manual.
WARRANTY AND SERVICE PROCEDURE
If you have a problem with your UNIT, or require replacement parts, please telephone
the following number for assistance:
North America 1-800-265-8456
Koolatron has Master Service Centres at these locations:
• Koolatron U.S.A. - 4330 Commerce Dr., Batavia, NY 14020-4102
• Koolatron Canada - 139 Copernicus Blvd., Brantford, ON N3P1N4
A Koolatron Master Service Centre must perform all warranty work.
www.koolatron.com
©2018 Koolatron, Inc. All rights reserved.
All specification are subject to change without notice.
H1S157 01/2018-v1-EngFre
WARNINGS
1. Observe manufacturer’s safety procedures when working around batteries and
other electrical equipment.
2. Product is designed to be used on 12V . Configurations in parallel ONLY Positive (+)
to Positive (+), Negative (-) to Negative(-). Ensure that the positive matches
the positive and the negative matches the negative.Wrong connections may cause
damage to part of all of the system.
3. Products should be placed in a well ventilated area. Free from flammable gases.
4. Make sure panel secured while vehicle is in motion to prevent physical damage
or harm to personal property.
MAINTENANCE
1. Clean panel, battery clamps, and cables of dirt and debris to prepare it for the next use.
2. Dry the parts so no moisture remains to cause corrosion of electrical connections.
3. Store the solar panel in a dry, secure place out of the reach of children.
4. Use only identical replacement components if damaged or worn.
Loading ...
