Loading ...
Loading ...
Loading ...
Use To
Hole Punch Mode
2 holes
3 holes
4 holes
Specify the number of holes to be created on printed outputs for the purpose
of collecting the sheets in a binder or folder.
Notes:
• 3 holes is the U.S. factory default setting. 4 holes is the international
factory default setting.
• This menu appears only when a supported staple, hole punch finisher is
installed.
Oset Pages
None
Between Copies
Between Jobs
Oset pages at certain instances.
Notes:
• None is the factory default setting.
• Between Copies
osets
each copy of a print job if Collate is set to (1,2,3)
(1,2,3). If Collate is set to (1,1,1) (2,2,2), then each set of printed pages are
oset, such as all page 1's and all page 2's.
• Between Jobs sets the same oset position for the entire print job
regardless of the number of copies printed.
• This menu appears only when a supported staple
finisher
is installed.
Quality menu
Use To
Print Resolution
300 dpi
600 dpi
1200 dpi
1200 Image Q
2400 Image Q
Specify the printed output resolution in dots per inch (dpi) or image quality.
Note: 600 dpi is the factory default setting.
Pixel Boost
O
Fonts
Horizontally
Vertically
Both directions
Enable more pixels to clarify and enhance images or text.
Note:
O
is the factory default setting.
Toner Darkness
1–10
Determine the darkness of the printed output.
Notes:
• 8 is the factory default setting.
• Selecting a smaller number can help conserve toner.
Understanding the printer menus 188
Loading ...
Loading ...
Loading ...