Loading ...
Loading ...
Loading ...
9
STANDARD OR ANGLED MOUNTING INSTRUCTIONS
1. Remove the downrod clip (C) and downrod pin (B) from
the downrod (A). Then partially loosen the set screws
(P) in the yoke at the top of the motor assembly (I).
2. Insert the downrod (A) through the canopy (E)
and yoke cover (K). Feed the wires from the motor
assembly (I) through the downrod (A).
3. Slide the downrod (A) into the yoke of the motor
assembly (I), align the holes, then re-install the
downrod pin (B) and downrod clip (C). Secure with set
screws (P) and slide the yoke cover (K) down until it
rests on top of the motor assembly (I).
1
I
A
B
C
P
I
E
K
I
A
K
C B
I
2
3
A
P
Loading ...
Loading ...
Loading ...