Loading ...
Loading ...
Loading ...
11
CLOSEMOUNT INSTRUCTIONS
Helpful Hint: The downrod (A), canopy cover (F) and
yoke cover (K) are not used in this type of installation.
1. Remove the canopy cover (F) from the bottom of the
canopy (E).
2. Remove three Phillips-head closemount screws (Q)
from the top of the motor assembly (I). Align the canopy
(E) with the holes in the top of the motor assembly (I),
then re-install the Phillips-head closemount screws
(Q) to secure the canopy (E) to the top of the motor
assembly (I).
3. Raise the fan and place the canopy (E) on the hook on
the mounting bracket (D), temporarily leaving hands free
for the wiring process.
1
2
3
E
F
Q
E
I
E
D
Hook
Loading ...
Loading ...
Loading ...