Loading ...
Loading ...
Energy Saving ideas
/
o The capacity of the room air conditioner must fit the room sizefor efficient and
satisfactory operation
• Install timeroom air conditioner on the shady sideof your home, A window that
faces north isbest because it isshaded most of the day,
Do not block air flow inside with blinds, curtains or furniture; or outside with
shrubs, enclosures, or other buildings
o Close the fireplace damper, floor and wall registers socoot air does not escape
up the chimney and into the duct work,
o Keep btindsand drapesin other windows closedduring thesunniest partof the day
• Clean the air filter as recommended in the section "Care and Cleaning "
oProperinsulation and weather stripping inyour home will help keep warm air out
and coot air in
_, External house shading with trees, plants or awnings will help reduce the air
conditioner's work load
oOperate heat producing appliances such as ranges, washers, dryers and
dishwashers during the coolest part of the day
installation
t i' Bottom Rail I it
i sea l if!I
l ....
_"222"22..... 21_iiT2221_""_'T77;-_LLLi,2_?,Z.... r
Installing Window Seal
Vertical Louver _
Screw
Unit Cover
_ _'_-- Screw
Horizontal
Louvers Front Panel
Front Installation - Side Air Discharge
Side Air and Top Air Discharge Models, Including Compacts
Installing Window Seal
The removable "sleeve"or cabinet (compact models) of the air conditioner must be
properly positioned for safeand efficient sealing, To installthe window seal,position
the bottom rail seal on timebottom rai! flush with the front edge of the rail and in
contact with side seals, Compact models are permanently encased in the cabinet,
which is not removable Referto the Installation Instructions
Manual Vertical Louver Adjustment
Complete this adjustment before installing front panel
1 Adjust the vertical louvers to the straight position by using the handle
2 The control panel and knobs are packed separately To install them, refer to
Installing the Dial Plate and Front Frame section
Front Installation
Install the front panel with filter asfollows:
t Adjust the horizontal louvers to the straight position Hold the front straight
until the vertical louver handle linesup between the bottom horizontal louver
and the discharge opening
2 Pressthe front straight onto the cabinet until the holes in the flange of the
plastic front line up with the screw holes in the metal cabinet Fastenthe front
panel in place with the two screws provided
Loading ...
Loading ...
Loading ...