Loading ...
Loading ...
Loading ...
18en | Installation and wiringEVID-S Surface Mount Loudspeakers
2018-10 | 02 | F.01U.345.360Installation manualElectro-Voice
1.Select the desired power tap by using the rotary switch on the input panel.
+
A
2.If 8 ohm mode is desired, remove the safety screw.
Safety screw (A) is shown in the previous step.
3.Attach the flush input cover (B).
B
4.4Replacing the logo
An additional logo is included, horizontal installation is shown.
To replace the logo, do the following:
1.Remove the existing logo.
2.Clean the surface with alcohol.
3.Align the logo with the logo recess on the grille.
4.Remove the paper backing.
Loading ...
Loading ...
Loading ...