Loading ...
Loading ...
Loading ...
EVID-S Surface Mount LoudspeakersInstallation and wiring | en15
Electro-VoiceInstallation manual2018-10 | 02 | F.01U.345.360
Wiring the speaker using the Euroblock connector
To wire the speaker using Euroblock connector, do the following:
1.Wire the Euroblock connector.
2.Adjust the tap settings, if needed.
3.Mount the speaker, as shown in the installation section.
4.Plug the Euroblock connector into the speaker.
5.Readjust the horizontal or vertical speaker position.
Wiring the speaker using the Euroblock connector and weather cover – optional accessory
To wire the speaker using Euroblock connector and weather cover, do the following:
1.Push the wire through the gland nut.
2.Wire the Euroblock connector (A).
A
B
C
3.Adjust the tap settings, if needed.
4.Mount the speaker, as shown in the installation section.
5.Plug the Euroblock connector into the speaker.
6.Insert the four screws into the weather cover (B).
Loosely tighten the four screws to keep the weather cover in place.
7.Tighten all four screws to secure the weather cover.
Ensure the weather cover is secure.
8.Adjust the wire length.
9.Tighten the gland nut (C).
10.Readjust the horizontal or vertical speaker position.
See also
–Installing the speaker, page 10
Loading ...
Loading ...
Loading ...