Loading ...
Loading ...
Loading ...
10en | Installation and wiringEVID-S Surface Mount Loudspeakers
2018-10 | 02 | F.01U.345.360Installation manualElectro-Voice
4Installation and wiring
4.1Installing the speaker
For safety, ensure the mounting surface supports more than the weight of the speaker. Use
only industry-accepted fasteners and mounting methods when mounting the wall bracket.
Consult an expert if you are unsure.
!
Caution!
It is the installer's responsibility to determine and use the proper mounting hardware for the
wall construction type.
Disregarding this caution could result in damage to the product and personal injuries may
occur.
Installing the wall bracket vertically
To install the wall bracket vertically, do the following:
1.Push the wire thru the hole.
2.Adjust the wall bracket until the bubble is level.
3.Install four mounting screws to secure the wall bracket to the wall.
4.Connect the wires to wall bracket audio connectors, as shown in the wiring section.
Notice!
If the speaker installation will be delayed cover it with the paint shield/dust shield.
Loading ...
Loading ...
Loading ...