Loading ...
Loading ...
Loading ...
16en | Installation and wiringEVID-S Surface Mount Loudspeakers
2018-10 | 02 | F.01U.345.360Installation manualElectro-Voice
4.3Transformer taps
You can select the mode of operation for all models that have a transformer. For the EVID-
S4.2T you can select the power tap for 70V/100V operation by using the jumper connector in
the Euroblock on the input panel. For the EVID-S5.2T and the EVID-S8.2T you can select the
mode of operation (70V/100V/8 ohm) and power taps using the rotary switch on the input
panel.
4.3.1EVID-S4.2T speaker 4” cabinet 70/100V
Configuring the transformer settings
To configure the transformer settings, do the following:
1.Remove the Euroblock connector from the input panel.
2.Wire the jumper connector in the Euroblock, according to the desired transformer
settings.
3.Plug the Euroblock connector into the input panel.
Loading ...
Loading ...
Loading ...