Loading ...
Loading ...
Loading ...
Before using for the first time
25
Con@ctivity via a direct Wi-Fi
connection (Con@ctivity3.0)
Prerequisite: Wi-Fi-enabled Miele
rangehood
You will find the necessary information
for integrating the rangehood in the
relevant operating and installation
instructions.
Switch the cooktop on.
Touch the 0sensor on any of the
numerical keybanks.
Touch and hold the0 and 7 sensors
on the numerical keybank at the
same time for 6seconds.
The seconds can be seen counting
down in the timer display. When this
time has elapsed, a progress light will
appear in the timer display during the
connection attempt. If the connection
was successful, the code : appears
in the timer display. If the connection
could not be established, the timer
display will show the code:. Repeat
the steps above.
When successfully connected, 2 and 3
will light up constantly on the
rangehood.
Quit connection mode on the
rangehood by pressing the run-on
control.
Con@ctivity has now been activated.
With a direct Wi-Fi connection, it is not
possible to connect the cooktop and
the rangehood to a home network. If
this is desired later, the direct Wi-Fi
connection between the cooktop and
the rangehood must first be reset (see
“Before using for the first time –
Con@ctivity” and in the operating and
installation instructions for the
rangehood see “Disconnecting the Wi-
Fi”).
Loading ...
Loading ...
Loading ...