Loading ...
Loading ...
Loading ...
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Configure System Information User Manual87
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 18 or Access the switch off-network on page 27.
The Local Device Login page displays.
If you did not yet register the switch with your NETGEAR account, the Register
to unlock
all features page displays. For more information, see
Register the switch on page 31.
4. Enter one of the following passwords:
• After registration, enter the local device password.
By default, the local device password is password
.
You must change this password
at initial login.
• If you previously managed the switch through the Insight app or
Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the local browser UI on
page 30.
5. Click the Login
button.
The System Information page displays.
6. Select System > Management
> Green Ethernet > Green Ethernet Configuration.
7. Select the EEE Mode Disable or Enable radio button.
Energy Efficient Ethernet (EEE) combines the MAC with a family of physical layers that
support operation in a low-power mode. It is defined by IEEE 802.3az Energy Efficient
Task Force. Lower power mode enables both the send and receive
sides of the link to
disable some functionality for power savings when lightly loaded. Transition to low-power
mode does not change the link status. Frames in transit are not dropped or corrupted in
transition to and from low-power mode. Transition time is transparent to upper layer
protocols and applications.
8. Click
the Apply
button.
Your settings are saved.
Loading ...
Loading ...
Loading ...