Loading ...
Loading ...
Loading ...
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Configure Switching User Manual153
4. Enter one of the following passwords:
• After initial login, enter your local device password.
By default, the local device password is password.
You must change this password
at initial login.
• If you previously managed the switch through the Insight app or
Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the local browser UI on
page 30.
5. Click the Login
button.
The System Information page displays.
6. Select Switching > Auto-V
oIP > Protocol-based > Port Settings.
7. From the Prioritization Type menu, select Traffic Class or Remark.
This specifies the type of prioritization.
8. From the Class V
alue menu, specify the CoS tag value to be reassigned for packets
received on the voice VLAN when Remark CoS is enabled.
9. In the Protocol Based Global Settings section, specify the Auto VoIP Mode settings:
a. Select whether to display physical interfaces, LAGs, or both by clicking one of the
following links above the table heading:
•1
(the unit ID of the switch). Only physical interfaces are displayed. This is the
default setting.
• LAG
. Only LAGs are displayed.
• All. Both physical interfaces and LAGs are displayed.
b. Select
one or more interfaces by taking one of the following actions:
• To configure a single interface, select the check box associated with the port, or
type the port number in the Go T
o Interface field and click the Go button.
Loading ...
Loading ...
Loading ...