Loading ...
Loading ...
Loading ...
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Maintain or Troubleshoot the Switch User Manual387
This option resets the switch to its factory default settings and resets its registration
status with NETGEAR. That is, the switch becomes an unregistered device.
After the switch reboots, to access the full menu of the browser UI, you first must
reregister the switch using your NETGEAR account credentials. If you previously
obtained a registration key, you can reenter the registration key. For more information,
see
Register the switch on page 31.
8. Click the Apply
button.
An Alert pop-up window opens.
9. Click the OK
button.
All configuration settings are reset to their factory default values. All changes that you
made are erased, even if you saved the configuration.
This process takes about 135
seconds.
Export a file from the switch
You can export configuration (ASCII) or log (ASCII log) files from the switch to a file server by
using TFTP or to a computer by using HTTP.
Use TFTP to export a file from the switch to a TFTP server
You can upload (export) configuration (ASCII or log ASCII) files from the switch to a TFTP
server on the network.
To export a file from the switch to a TFTP server:
1. Connect your
computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ether
net cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 18 or Access the switch off-network on page 27.
The Local Device Login page displays.
If you did not yet register the switch with your NETGEAR account, the
Register to unlock
all features page displays. For more information, see
Register the switch on page 31.
4. Enter one of the following passwords:
• After initial login, enter your local device password.
By default, the local device password is
password.
Y
ou must change this password
at initial login.
Loading ...
Loading ...
Loading ...