Loading ...
Loading ...
Loading ...
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Maintain or Troubleshoot the Switch User Manual383
Reboot the switch
You can reboot the switch from the local browser UI.
However, if you can physically access the switch, you can reboot the switch by pressing a
button on the front panel:
• Model GS724TPv2. Press the single-function Reset button for more than one second.
• Model GS724TPP.
Press
the multi-function Reset button for less than 5 seconds. (Do not
press the button for more than 5 seconds!)
To reboot the switch from the local browser UI:
1. Connect your
computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ether
net cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 18 or Access the switch off-network on page 27.
The Local Device Login page displays.
If you did not yet register the switch with your NETGEAR account, the
Register to unlock
all features page displays. For more information, see
Register the switch on page 31.
4. Enter one of the following passwords:
• After initial login, enter your local device password.
By default, the local device password is
password.
Y
ou must change this password
at initial login.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the local browser UI on
page 30.
5. Click the Login
button.
The System Information page displays.
6. Select Maintenance >
Reset > Device Reboot.
The Device Reboot page displays.
7. Select the check box.
8. Click the Apply
button.
An Alert pop-up window opens.
Loading ...
Loading ...
Loading ...