Loading ...
Loading ...
Loading ...
12
1. Turn the gas control knob clockwise to the pilot position. The main burner will extinguish and the
pilot burner will remain alight.
2. To turn 'OFF' the appliance completely, turn the gas control knob fully clockwise to the 'O' position,
the pilot burner will extinguish.
The oven is fitted with top and bottom elements. The thermostat maintains the overall oven
temperature. The top element is further controlled by the oven top heat control. Convection ovens
(GPE56 / 58) are fitted with a circulation fan.
NOTE: The Thermostat on the static oven provides overall control of the temperature within the
oven by controlling both elements, whereas the Oven Top Heat Control provides a means of
balancing the distribution of heat between the top and bottom of the oven.
Place the oven racks in the desired position.
Preheat:
Preheat the oven by turning the oven top heat control (Refer to Fig 4 at the start of this section) to a
maximum of 2. When the desired temperature is reached, the amber neon will go out.
Cooking:
When the desired temperature has been reached, load the oven with product and set the oven top
heat control to the desired setting.
NOTE: When the oven top heat control is set to a high setting, proportionally more heat is
produced at the top of the oven. (This can be used for browning, etc, during the cooking
operation). With the oven top heat control set on a low setting, less heat is produced from
the top oven elements. (This mode is used for general baking purposes to prevent cakes,
etc, from getting too brown and crisp on the top, but allows the cake to cook through).
To obtain more top heat during cooking, turn the oven top heat control to a higher position. (The
higher the setting, the more top heat).
Turning ‘OFF’ the Oven:
a. Turn the oven top heat control to the ‘O’ off position. The top heating will be turned ‘OFF’ and
the upper heating indicator lamp (Amber) will extinguish.
b. Turn the thermostat control knob to the ‘O’ off position and the lower heating indicator lamp
(Amber) will extinguish. The oven is now turned ‘OFF’.
! IMPORTANT
DO NOT USE aluminium foil or trays directly on the cast iron sole plate(s).
NEVER block or cover the openings on each side of the sole plate(s).
! IMPORTANT
DO NOT USE aluminium foil or trays directly on the cast iron sole plate(s).
NEVER block or cover the openings on each side of the sole plate(s).
IMPORTANT:
Should any abnormal operation like;
- ignition problems,
- abnormal burner flame,
- burner control problems,
The appliance requires IMMEDIATE service by a qualified service person and should not be used
until such service is carried out.
Loading ...
Loading ...
Loading ...