Loading ...
Loading ...
Loading ...
14
Lighting the Griddle
a. Depress gas control knob and rotate anti-clockwise to ‘PILOT’ position.
b. Hold gas control knob depressed, press piezo ignition button to ignite pilot burner. Repeat Items
1 to 2 until pilot is lit.
c. Release gas control knob approximately 10-20 seconds after lighting pilot.
d. Pilot should now remain alight - if not, repeat Steps (b. to (c. above.
e. To select ‘Full Flame’, depress and rotate gas control knob anti-clockwise to ‘HIGH’ position.
f. To select ‘Low Flame’, depress and rotate gas control knob fully anti-clockwise to ‘Low Flame’
position.
g. When main burner is not required, depress and turn gas control knob clockwise back to ‘OFF’
position.
Turning 'OFF' the Griddle Burner / Pilot
a. To turn 'OFF' griddle, but keep pilot burner alight, rotate gas control knob to 'PILOT' position.
Griddle burner will extinguish and pilot will remain alight.
b. To turn 'OFF' 'PILOT', depress and turn gas control knob clockwise back to ‘OFF’ position. 'PILOT'
burner will extinguish.
This oven is fitted with a pilot as a standard option and flame failure protection, which is incorporated by
way of a thermo-electric system for the main burner. Flame failure protection will shut off gas supply to
burner in the event that pilot burner goes out, so that un-burnt gas is not expelled.
This is an important
safety feature which is slowly becoming law throughout the world
.
1. Open oven door.
2. Depress oven gas control knob and rotate anti-clockwise
to ‘PILOT’ position.
3. While holding oven gas control knob depressed, press
piezo ignition button to ignite pilot burner. Repeat Items
1 and 2 until pilot burner is lit.
4. Release gas control knob approximately 10-20 seconds
after lighting pilot.
5. Pilot should now remain alight - if not, repeat Steps 2 to
3 above.
6. Ensure that pilot burner is alight by opening pilot burner
inspection covers and looking through pilot burner
viewing holes in cast oven sole plate.
NOTE: Ensure that pilot burner inspection covers are closed once pilot is lit.
Pilot Burner
viewing holes
Pilot Burner
Inspection Covers
Sole Plate
Fig 4
DO NOT USE aluminium foil or trays directly on cast iron sole plate(s). NEVER block or cover
openings on each side of sole plate(s).
! IMPORTANT
Always ensure that the grease tray is emptied regularly and never allow the grease tray to overflow.
! IMPORTANT
Loading ...
Loading ...
Loading ...