Loading ...
Loading ...
Loading ...
English
Installation
English22
STEP 4 Connect the water hose
B
A
CAUTION
• Make sure you use a new water hose, and there are
rubber gaskets (B) inside the couplings (A) at either
end of the water hose. A water hose without the
gasket may cause a water leak.
• If there is a water leak, stop using the washer and
contact a local Samsung service center. This may
cause electric shock.
• Do not stretch the water hose by force. If the hose
is too short, replace the hose with a longer, high-
pressure hose.
• To prevent leaks, make sure both water hoses are
not bent or kinked. A water leak may cause electric
shock.
1. Attach the water hoses to the hot and cold water
taps, and then hand tighten the water hose fittings
until they are tight. Then, use pliers to tighten the
fittings by an additional two-thirds of a turn. To
avoid damaging the fittings, do not overtighten
them.
2. Pull the water hoses to check if they are firmly
connected.
AC-WW6800_WASHER_LED_03645G-00_EN.indd 22 2022/6/23 13:51:01
Loading ...
Loading ...
Loading ...