Tripp Lite B140-004 Owner's Manual

Loading ...

Extender/Splitter Daisy-Chain with Remote/

Repeater Installation (B140-004 extender/splitter,

and B140-1A0 and B140-1A0-WP remote receivers only)

Up to four units can be daisy chained (three remote/repeaters and one

receiver). To connect additional remote/repeater units, proceed to step

11. To ﬁnish your installation with a B140-1A0 or B140-1A0-WP-1 remote

receiver unit, proceed to step 15.

Using Cat5e/6 cable, connect the RJ45 OUTPUT port on the ﬁrst remote/

repeater unit to the RJ45 INPUT port on a second remote/repeater unit.

Connect a monitor to the DVI OUTPUT port on the remote/repeater unit

that you just added using a Tripp Lite P561-Series DVI-D Single Link

Cable.

Connect the external power supply to the remote/repeater unit and plug

it into a Tripp Lite Surge Protector, PDU or UPS. The green Power LED

and the green RJ45 LEDs illuminate to indicate the unit is receiving

power.

To add a third remote/repeater unit, repeat steps 11 through 13. To

ﬁnish your installation with a B140-1A0 or B140-1A0-WP-1 remote

receiver unit, proceed to step 15.

Using Cat5e/6 cable, connect the RJ45 OUTPUT port on the last remote/

repeater unit to the RJ45 INPUT port on a B140-1A0 or B140-1A0-WP-1

remote receiver unit.

Connect a monitor to the DVI OUTPUT port on the remote receiver unit

using a Tripp Lite P561-Series DVI-D Single Link Cable.

Connect the external power supply to the remote receiver unit and plug

it into a Tripp Lite Surge Protector, PDU or UPS. The green RJ45 LEDs on

the B140-1A0 and the green LED on the B140-1A0-WP-1 illuminate to

indicate that the unit is receiving power.

17-08-508-933776.indb 25 11/27/2017 11:47:51 AM

Loading ...

Tripp Lite B140-004 4-Port DVI over Cat5/6 Splitter/Extender, Box-Style Transmitter