Tripp Lite B140-004 Owner's Manual

Loading ...

Connect a monitor to the DVI OUTPUT port on the remote receiver unit

using a Tripp Lite P561-Series DVI-D Single Link Cable.

Connect the external power supply to the remote receiver unit and plug

it into a Tripp Lite Surge Protector, PDU or UPS. The green RJ45 LED on

the B140-101X remote receiver, or the green Power LED on the

B140-1A1-WP remote wallplate, illuminates to indicate the unit is

receiving power from the external power supply.

Turn on the power to the DVI source. The orange LEDs on the

B140-1A1-WP units illuminate to indicate a signal is being received from

the source. The orange RJ45 LEDs on the B140-101X and B140-110

units illuminates to indicate a signal is being received from the source.

If necessary, use the Equalization control on the remote/repeater unit(s)

and remote receiver unit to adjust the video image.

Note: An improper Equalization setting can cause the monitor not to display a

picture at all. Try each Equalization setting until an acceptable picture is displayed.

Extender Kit with Remote/Repeater Installation

(B140-101X and B140-1A1-WP extender kits only)

17-08-508-933776.indb 13 11/27/2017 11:47:47 AM

Loading ...

Tripp Lite B140-004 4-Port DVI over Cat5/6 Splitter/Extender, Box-Style Transmitter