Tripp Lite B140-004 Owner's Manual

Loading ...

Standard Extender Kit Installation

B140-1A1-WP only: Connect the external power supply to the local

unit and plug it into a Trip Lite Surge Protector, Power Distribution Unit

(PDU), or Uninterruptable Power Supply (UPS). The green Power LED will

illuminate.

Connect the RJ45 ports on the local and remote units using

Cat5e/6 cable.

Connect the built-in DVI connector on the B140-101 remote unit to the

DVI monitor, or connect the B140-1A1-WP, B140-1P1-WP-1 or

B140-101X remote unit to the monitor using a Tripp Lite

P561-Series DVI cable.

B140-1A1-WP and B140-101X only: Connect the external power

supply to the remote unit and plug it into a Tripp Lite Surge Protector,

Power Distribution Unit (PDU) or Uninterruptible Power Supply (UPS).

The green RJ45 LED on the B140-101X remote unit will illuminate to

indicate it is receiving power. The green Power LED will illuminate on the

B140-1A1-WP remote unit.

Turn on the power to the DVI source. The green RJ45 LEDs will

illuminate on the B140-101 and B140-101X units, and the Power LEDs

will illuminate on the B140-1P1-WP-1 units to indicate that they are

receiving power. The orange RJ45 LED will illuminate on the B140-101X

remote unit to indicate it is receiving a signal from the source. The

orange Activity LEDs will illuminate on the B140-1A1-WP units.

B140-1A1-WP and B140-101X only: If necessary, adjust the

Equalization control on the remote unit to improve the video image.

Note: An improper Equalization setting can cause the monitor not to display a

picture at all. Try each Equalization setting until an acceptable image is displayed.

17-08-508-933776.indb 10 11/27/2017 11:47:46 AM

Loading ...

Tripp Lite B140-004 4-Port DVI over Cat5/6 Splitter/Extender, Box-Style Transmitter