Loading ...
Loading ...
Loading ...
17
Properly dispose of
the old batteries.
1.5V AAA battery
Figure 5.1
Checking the Fuses
10A Fuse
Always check the 10A fuse before each use,
especially before measuring current. If the
internal fuse is overloaded, you must
immediately replace it.
1. Plug the red test lead into the
terminal.
2. Turn the rotary dial to .
3. Insert the metal end of the red test lead
into the 10A terminal. If the multimeter
beeps, then the internal fuses are still
ready. If the multimeter does not beep,
then the internal fuses have been
overloaded and the LCD will read “
”.
200mA Fuse
If the display only reads “ 0.0 ” when
measuring current using the
Terminal, it means that the 200mA fuse must
be replaced.
Note:
•
10A
Terminal Fuse: 10A/600V
Φ5x20mm
• Terminal Fuse: 200mA/600V
Φ5x20mm
Loading ...
Loading ...
Loading ...