Loading ...
Loading ...
Loading ...
Specifications
Owner’s Manual
Tio1608-D
-
119
-
EnglishDeutschFrançais
EspañolPortuguêsItaliano
Русский
日本語
Specifications
General Specifications
Output impedance of signal generator: 150ohms
Measured with another Tio1608-D through Dante network.
Frequency Response Fs = 44.1kHz or 48kHz, 20Hz-20kHz, refer to the nominal output level @1kHz
Total Harmonic Distortion Fs = 44.1kHz or 48kHz
* Total Harmonic Distortion is measured with a -18dB/octave filter @80kHz
Hum & Noise Fs = 48kHz, EIN: Equivalent Input Noise
* Hum & Noise are measured with A-weighting filter.
Dynamic Range Fs = 48kHz
* Dynamic Range are measured with A-weighting filter.
Crosstalk@1kHz
* Crosstalk is measured with a -30dB/octave filter @22kHz
Sampling Frequency
Power Requirements
AC Cable Length and Temperature Range
Dimensions (W x H x D) & Net weight
480(W) x 88(H) x 364(D) mm, 5.7kg
Input
Output RL Conditions Min. Typ. Max. Unit
INPUT1-16 OUTPUT 1-8 600Ω GAIN: +66dB. -1.5 0.0 0.5 dB
Input
Output RL Conditions Min. Typ. Max. Unit
INPUT1-16 OUTPUT 1-8 600Ω +4dBu@20Hz-20kHz, GAIN: +66dB. 0.1 %
600Ω +4dBu@20Hz-20kHz, GAIN: -6dB. 0.05 %
Input
Output RL Conditions Min. Typ. Max. Unit
INPUT1-16 OUTPUT 1-8 600Ω Rs=150Ω, GAIN: +66dB. -128
EIN
dBu
-62 dBu
600Ω Rs=150Ω, GAIN: -6dB. -84 -80 dBu
all Inputs OUTPUT 1-8 600Ω Rs=150Ω, GAINs: -6dB
Master fader at nominal level and all INPUT 1-16 in
faders at nominal level.
Measured with TF5 (or TF3,TF1) through Dante.
-70 dBu
- OUTPUT 1-8 600Ω Residual output noise, STEREO master off.
Measured with TF5 (or TF3,TF1) through Dante.
-88 dBu
Input
Output RL Conditions Min. Typ. Max. Unit
INPUT1-16 OUTPUT 1-8 600Ω AD + DA, GAIN: -6dB. 108 dB
- OUTPUT 1-8 600Ω DA Converter 112 dB
from/to
to/from Conditions Min. Typ. Max. Unit
INPUT n INPUT (n-1) or (n+1) INPUT1-16
adjacent inputs, GAIN: -6dB.
-100 dB
OUTPUT n OUTPUT (n-1) or (n+1) OUTPUT 1-8, input to output -100 dB
Conditions Min. Typ. Max. Unit
External Clock Frequency Range 44.1kHz / 48kHz -200 +200 ppm
+4.1667%/+0.1%/-0.1%/-4.0% to all of the above -200 +200 ppm
Conditions Min. Typ. Max. Unit
Power Requirements 100-240V 50/60Hz 50 W
Heat Dissipation 100-240V 50/60Hz 43.5 kcal/h
Conditions Min. Typ. Max. Unit
AC Cable Length 2.5 m
Temperature Range Operating temperature range 0 40 °C
Storage temperature range -20 60 °C
Loading ...
Loading ...
Loading ...