Sony SRSNS7 User Manual

Loading ...

Make sure that the microphone of the neckband speaker is not turned off.

View the audio settings on the BLUETOOTH device to make sure that the neckband speaker is configured to output

audio during a phone conversation.

Make sure that the neckband speaker has a BLUETOOTH connection with the BLUETOOTH device.

Pair the neckband speaker with the BLUETOOTH device all over again. If the neckband speaker is connected with a

different BLUETOOTH device, terminate the BLUETOOTH connection with the device, and then pair the neckband

speaker with the target BLUETOOTH device all over again.

Make sure that the equalizer function is deactivated on the connected device.

Depending on the BLUETOOTH device, changing the preference for the quality for music playback via BLUETOOTH

connections is available. In such a case, select the “Priority on Stable Connection” (SBC) preference. For details,

refer to the operating instructions supplied with your BLUETOOTH device.

Select the “Priority on Stable Connection” (SBC) preference for the quality for music playback via BLUETOOTH

connections.

Make sure that the computer is configured to output audio through the neckband speaker when connected with the

neckband speaker.

When listening to music from a computer through the neckband speaker, the sound quality may be poor (e.g.,

difficulty in hearing the vocal sound, etc.) for the first few seconds after a connection is established. This is due to the

computer specifications (priority is given to stable connection at the beginning of communication and then switched

to sound quality in several seconds) and does not indicate a malfunction of the neckband speaker.

If the sound quality does not improve in a few seconds, operate the computer to establish an A2DP connection. For

operations on the computer, refer to the operating instructions supplied with your computer.

If the neckband speaker and the source BLUETOOTH device for music playback are connected with the HFP or HSP

BLUETOOTH profile, operate the BLUETOOTH device to change the profile to A2DP.

Move the neckband speaker away from a device such as a microwave oven and a wireless LAN access point.

Bring the neckband speaker closer to the BLUETOOTH device. If there is any obstacle between the neckband

speaker and the BLUETOOTH device, move it out of the way.

Establishing a BLUETOOTH connection between the neckband speaker and a device with a built-in radio or tuner

may cause noise in audio from the device. The neckband speaker should not be used with such a device via

BLUETOOTH connection.

When using the neckband speaker, keep it away from a device such as a TV, a radio, or a tuner. Use of the

neckband speaker in the vicinity of such a device may cause noise in audio from the device.

Sony SRSNS7 SRS-NS7 Neckband Bluetooth Speaker with personalized home theater audio, Built-in mic, 12 Hours of Battery Life, IPX4 Splash-Resistant, and included wireless TV adaptor WLA-NS7.