Loading ...
Loading ...
Loading ...
Hint
As long as the BLUETOOTH function is activated on the Android smartphone or iPhone that has previously been connected with
the neckband speaker, the neckband speaker is reconnected with the Android smartphone or iPhone right after it is turned on.
The above instructions are provided as an example. For details, refer to the operating instructions supplied with your Android
smartphone or iPhone.
When [SRS-NS7] and [LE_SRS-NS7] are displayed for the connection attempt, select [SRS-NS7].
Although [LE_SRS-NS7] is first displayed, wait until [SRS-NS7] is displayed.
It may take about 30 seconds to 1 minute before [SRS-NS7] is displayed.
If [SRS-NS7] is not displayed, repeat the procedure all over again from step
.
If passkey entry is prompted on an Android smartphone or an iPhone, enter “0000.”
The passkey may be called a “passcode,” “PIN code,” “PIN number,” or “password.”
Note
For Apple iOS devices, the neckband speaker is compatible with iOS 10.0 or later. BLUETOOTH connection is not available on
the devices with iOS 9.x or earlier installed.
The neckband speaker comes out of pairing mode in about 5 minutes and the indicator on the neckband speaker turns to slow
blue flashing. If the neckband speaker comes out of pairing mode before you complete the procedure, repeat the procedure all
over again from step
.
Once the neckband speaker is paired with the BLUETOOTH device, there is no need to pair them again, except in the following
cases:
Pairing information is deleted in the course of repair work, etc.
The neckband speaker is already paired with 8 devices and another device is to be paired.
If [SRS-NS7] is not displayed on the screen, tap [ ] to change it to [ ], and then tap it once again to
change it back to [
].
Follow the on-screen instructions to establish a BLUETOOTH connection.
When a BLUETOOTH connection is established, you hear voice guidance (BLUETOOTH connected) from the
neckband speaker and the indicator on the neckband speaker starts flashing in blue.
If a BLUETOOTH connection is not established, repeat the procedure all over again from step .
3
38
Loading ...
Loading ...
Loading ...