Loading ...
Loading ...
Loading ...
3. Product Introduction
– 4 –
3.1 Intended Use
This product is designed to extract moisture from damp
or humid industrial environments to prevent the build-up
of mould and other hazards. Any other application
beyond the conditions established for use will be
considered misuse. Draper Tools accepts no
responsibility for improper use of this product.
Part of our ore range, this product is suitable for regular
use by enthusiasts and tradespersons alike.
Important: This product is not a water pump and is not
designed to transfer water from one location to another.
WARNING! This product is not a toy and must be
respected.
Read this manual in full before attempting to assemble,
operate or maintain the product, and retain it for later
use.
Stock No. 12498
Part No. DH50
Rated frequency 50Hz
Rated power 900W
Rated current 4.0A
Extraction rate 50L per day (at 30°C, 80% relative humidity)
Target humidity range 10–95%
Condensate capacity 7L
Condensate tank outlet Ø12mm
Refrigerant: R290 (propane) 200g
Max. suction pressure 1.0Mpa
Max. discharge pressure 2.5Mpa
Minimum room size 10m
2
Ambient operation environment 5–35°C
Global warming potential 3
Ingress protection IP22
Dimensions W 450 × H 655 × D 480mm
Net weight 30kg
3.2 Specication
Loading ...
Loading ...
Loading ...