Loading ...
Loading ...
Loading ...
7.3 Information messages
The table below shows information messages that can be found in the
Messages
menu in the Automower
®
Connect app and in Automower
®
Access. Speak to your local Husqvarna representative if the same message shows
frequently.
Message Cause Action
Limited cutting height
The cutting height adjustment cannot move. Examine the cutting height adjustment and
remove grass or other objects. If the problem
stays, speak to your approved servicing deal-
er.
Unexpected cutting
height adj
Limited cutting height
range
Cutting height prob-
lem
Cutting system imbal-
ance
The product has discovered vibrations in the
blade disc.
Make sure that the blades and screws are
not damaged and worn. Make sure that all
blades are correctly installed and that there
is only one blade attached in each position
on the blade disc. Clean the blades and the
cutting disc.
Guide 1 not found
Guide 2 not found
Guide 3 not found
The guide wire you have installed before is
not found.
Examine if the guide wire is not correctly
connected to the charging station or the
boundary wire. Examine if there is a break
in the guide wire. Refer to
Finding breaks in
the loop wire on page 38
.
GPS navigation prob-
lem
Problem with the GPS assisted navigation
equipment.
Restart the product. If the problem stays,
speak to your authorized service center.
Weak GPS signal
The GPS signal is blocked in large parts of
the work area.
If possible, remove objects that can cause a
blockage of the GPS signal.
Disable the GPS navigation function and use
the lawn coverage function. Refer to
GPS
assisted navigation on page 22
.
36 - Troubleshooting 2071 - 001 - 29.03.2023
Loading ...
Loading ...
Loading ...