Loading ...
Loading ...
Loading ...
Wait for the app to exchange data with the Petcube Camera and scan
for available Wi-Fi networks, then select your home Wi-Fi network from
the list, put in your network password and hit ‘Connect’. If you don’t see your
home network on the list or if you’re using a hidden network, connect to your
home Wi-Fi by pressing ‘Connect manually’, then enter your network name
and password and hit ‘Connect’ (keep in mind that it is case sensitive).
Once the LED light on your Petcube Camera changes to solid white, you
are ready to play with your Petcube Camera.
6. Oh bummer setup error
If during the setup you’re getting an ‘Oh Bummer’ error message, turn your
Petcube off and back on, wait up to 1 minute until it boots up and starts blinking
and start the setup process over again.
7. I don’t see my home Wi-Fi network
This problem can occur if you are trying to connect your Petcube to either
a 5GHz frequency range network or a hidden network.
Unfortunately, Petcube doesn’t work with 5GHz networks, but since most routers
support both 5GHz and 2.4GHz frequencies at the same time, you should not
have any problem adding the 2.4GHz channel.
If you have a hidden network, you will be prompted to enter your network SSID
and password manually.
If you use an unhidden 2.4GHz network but it still doesn’t show up in the list
of options, turn your Petcube off and back on, wait up to 1 minute until it boots
up and starts blinking and start the setup process over again.
8. No Wi-Fi network shows up during setup
If you have an empty list of available Wi-Fi networks in the Petcube App when
you need to select your home Wi-Fi network, turn your Petcube off and back
on, wait up to 1 minute until it boots up and starts blinking and start the setup
Loading ...
Loading ...
Loading ...