Loading ...
Loading ...
Loading ...
Please read this owner's manual,. It will tell you how
to use all the fine features of this microwave oven
LOCATION OF MODEL NUMBER
To request service information or replacement parts,
the service center wilt require the comptate model
number of your microwave oven The number is on the
left side of control panel as shown in the illustration
below
MODEL NUMBER LABEL
OVEN SPECIFICATIONS
Output Power 1,000W (IEC 60705 Standard)
Outer Dimensions 29-t5/16" x 16-7/16" x 15-3/8"
Cavity Volume 15 Cuft
Net Weight 52 lbs
ELECTRICAL RATING
Electrical Rating of the Oven;120V AC 60Hz
* 13 Amps ! 1500 Watts ( MWO + Cooktop Lamp +
Ventilation Fan)
ELECTRICAL REQUIREMENTS
The oven is designed to operate on a Standard
t20VI60Hz household cutter Be sure the circuit Is at
teast 15A or 20A and the microwave oven is the only
appliance on the circuit. It is not designed for 50Hz
or any circuit other than a 120V/60Hz circuit
GROUNDING INSTRUCTIONS
This appliance must be grounded,, I_an electrical
short circuit occurs, grounding reduces the risk of
electric shock by providing an escape wtre for the
electric current The cord for this appliance has a
grounding wire with a grounding plug Put the piug into
an cutlet that is properly installed and grounded
WARNING - If you use the grounding plug
improperly, you risk electric shock.
Ask a qualified electrician it you do not understand the
grounding instructions or if you wonder whether the
appliance is properly grounded
Because this appliance fits under the cabinet, It has a
short power-supply cord See the separate Installation
Instructions for directions on properly placing the cord
Keep the efectrical power cord dry and do not pinch or
crush it in any way
If it ts necessary to use an extension cord, use only a
3-wire extension cord that has a 3-blade grounding
plug, and a 3_slot receptacle that witl accept the plug
on the applIance The marked rating of the extension
cord shall be equal to or greater than the electrical
rating of the appliance
Ensure proper ground
exists before use
For a permanently connected appliance:
This appliance must be connected to a grounded,
metalfic, permanent wiring system, or an equipment
grounding conductor shoutd be run with the circuit
conductors and connected to the equipment grounding
terminal or lead on the appliance
-6-
Loading ...
Loading ...
Loading ...