Loading ...
Loading ...
Loading ...
8
Using your Mixmaster
®
HeatSoft
TM
Planetary Mixer
To attach HeatSplash Guard
1. Rotate Control Dial to off position “0” to
turn unit off.
2. Unplug Stand Mixer.
3. After bowl and accessory are assembled
to mixer, Gently lower mixer head,
ensuring it locks in downward position.
A “click” sound will indicate the mixer
head has locked securely into position.
4. From the front of the mixer, slide the
HeatSplash Guard over the bowl and
accessory until it is centered. The inner
ring of the HeatSplash Guard should fit
over the outer rim of the bowl. Note:
The HeatSplash Guard must be placed
over both heat nozzles (Figure E).
Figure E
1
2
3
4
5
6
7
8
9
10
To use HeatSplash Guard
1. When using HeatSoft Technology, use
HeatSplash guard for best results.
2. While securing HeatSplash Guard with
one hand, pour the ingredients into the
bowl through the pouring chute.
To remove HeatSplash Guard
1. Rotate Control Dial to off position “0” to
turn unit off.
2. Unplug Stand Mixer.
3. Lift the front of the HeatSplash Guard
clear of the bowl rim and pull forward.
LED light
This stand mixer has an LED light on the
mixer head (Figure F). The LED light allows
for better visibility of the mixture to ensure
desired consistency. The LED light will
switch on automatically when the mixer is
in operation and automatically switch off
when the mixer is not in use.
Figure F
Loading ...
Loading ...
Loading ...