Loading ...
Loading ...
Loading ...
41
2. Find the factory reset procedures for your device below:
2a. For (SWIFI-2KICAM/2KOCAM/ALERTCAM/SPOTCAM/4KFLOCAM/FLOCAM/TRACKCAM/PTCAM2 models)
Press and hold the Reset button for 20 seconds until the blue LED indicator on the camera turns off. Release the
Reset button. The camera will start the factory reset process which can take up to 2 minutes.
2b. For (SWIFI-XTRCAM) / (SWIFI-BUDDY)
Press and hold the SET and RST buttons simultaneously, then release the RST button and continue holding the
SET button until the LED starts blinking red. Release the SET button. The camera will start the factory reset process
which can take up to 2 minutes.
2c. For (SWIFI-CORECAM/COREPRO)
Make sure the Power switch is in the ON position. Press and hold the Reset button (for about 10 seconds) until the
LED indicator on the camera turns off. Release the Reset button. The camera will start the factory reset process
which can take up to 2 minutes.
2d. For (SWIFI-FOURTIFY)
Press and hold the Reset button for 10 seconds. Release the Reset button. You'll hear the camera say "Restore
factory settings and format SD card". The camera will start the factory reset process which can take up to 2
minutes.
2e. For (SWIFI-CAM)
Press and hold the Reset and Pair buttons simultaneously, then release the Reset button and continue to hold only
the Pair button for another 35 seconds. Release the Pair button. The camera will start the factory reset process
which can take up to 2 minutes.
3. When factory reset is complete, the LED indicator/ring on the camera will blink blue slowly to indicate that it is in
pairing mode (on certain models, you will also hear the device say "Ready for pairing").
IMPORTANT: After factory resetting your device, you'll have to pair it with your Wi-Fi network again. See "Pairing
the Device" on page 7.
FACTORY RESETTING THE CAMERA
Loading ...
Loading ...
Loading ...